Freedom's Forge (54 page)

Read Freedom's Forge Online

Authors: Arthur Herman

BOOK: Freedom's Forge
12.66Mb size Format: txt, pdf, ePub
ACKNOWLEDGMENTS

THIS BOOK IS
a special salute to the millions of Americans who worked in the factories, shipyards, mines, farms, plants, and offices to make victory in World War II possible—and to those who spoke to me about their service and sacrifice during those years. We all owe a permanent debt of gratitude to them.

Writing this book was an amazing experience. So many wonderful people shared their time, thoughts, and labor to make it happen, and I’m pleased to have the opportunity to thank as many of them as I can.

I start with the American Enterprise Institute, where I served as a visiting scholar from September 2010 to May 2012. AEI’s former president Chris DeMuth was enthusiastic about the project from the start, saw its rich possibilities, and offered invaluable advice at every stage. AEI’s current president, Arthur Brooks, warmly extended every resource AEI had to offer, as did its executive vice president, David Gerson. Henry Olsen, director of the National Research Initiative, made sure support for the book was there at critical times, and helped me enormously in understanding the book’s lessons for the present.

The list of AEI colleagues who helped in my research is staggeringly long, but certain names stand out: Joe Antos, Michael Auslin, Claude Barfield, Michael Barone, Kevin Hassett, Bob Helms, Marvin Kosters, Michael Novak, and Alex Pollock, as well as Tom Donnelly and Gary Schmitt of AEI’s Center for Defense Studies. Véronique Rodman encouraged me to think creatively about the book’s many audiences, as did John Cusey of AEI’s Government Relations Office. And a very special thanks goes to my research assistant Keriann Hopkins, who tirelessly helped with the research and then correcting the typescript and galleys, and tracked down books, images, and photo permissions with riveting diligence. Thanks also to interns Joey McCoy and Harrison Dietzmann for their help along the way.

One of the first people I spoke to about this project was my friend Roger Hertog, a champion and advocate of all my work. Paul Johnson and Steve Forbes helped to shape many of the book’s major themes, as did Dan Senor and the Discovery Institute’s George Gilder. And every historian venturing into the arena of industrial mobilization during World War II owes an enormous debt to Alan Gropman of the National Defense University, Professor Mark Harrison of the University of Warwick, and Professor Richard Overy, author of
How the Allies Won
. Without their prior work, this project would not have been possible.

Grateful thanks also go to the staff of the National Automotive History Collection at the Detroit Public Library and the Henry J. Kaiser Papers at the University of California, Berkeley’s Bancroft Library; the Library of Congress; the Henry Ford Collection; the National Archives at College Park, Maryland; the libraries at Georgetown University and George Washington University; the New York Public Library; the Navy Historical Center at the Washington Shipyards; and the U.S. Army Center of Military History at Fort McNair, particularly its former chief archivist Frank Shirer; as well as the friendly people who run the Rosie the Riveter Trust at the Home Front National Park in Richmond, California.

The Cosmos Club Library, and librarian Karen Mark, helped with the earliest stages of my research. Staff past and present from the Grumman History Center at Bethpage, New York, answered many important questions, while the resources for studying the history of American business at the Hagley Library and Archives in Wilmington, Delaware, are matched only by the helpfulness of the staff and the beauty and comfort of its surroundings.

The libraries at the University of Virginia in Charlottesville, especially the Brown Science and Engineering Library, were indispensable to the project from start to finish, as were the efforts of librarians Philip McEldowney and Warner Granade in making my work as painless and trouble free as possible.

I also want to thank the many people who agreed to sit down for interviews about parents and grandparents who were central to the book. They included Fred Eberstadt, Peter and Clay Bedford Junior, Richard Girdler, and Judith Knudsen Christie. Ms. Christie also kindly
gave me permission to read the unpublished oral history interview of her aunt and Bill Knudsen’s daughter, Martha Knudsen. Warren Kidder, author of
Willow Run: Colossus of American Industry
, offered interesting insights about working with Henry Kaiser in the postwar years. And many years ago the late John J. McCloy generously took time to answer my questions about working with the legendary Colonel Henry L. Stimson at the War Department.

Automotive scholar Mike Davis kindly took time to read the first chapter of the book, while Bob Brown, editor of
Magnesium Monthly Review
, not only read chapters but provided help with everything from documenting Henry Kaiser’s magnesium ventures to finding me a B-29 pilot’s manual. My friend Jeb Nadaner, formerly of the Department of Defense and now at Lockheed Martin, carefully followed the book’s progress and offered suggestions and insights that all helped to make it a better book.

Tom Veblen’s friendship, support, and sage counsel decisively charted the book’s course, and he kindly read an early draft of the manuscript. Linda Veblen’s hospitality and her reminiscences of her father’s service as a B-25 pilot in Italy also helped to understand the real meaning of the arsenal of democracy. My editor at the
New York Post
, Bob McManus, saw the significance of the project and passed along materials to help.

Other friends offered advice, encouragement, read early chapters, or generally put me on to the right research trail. They include (again, in alphabetical order) Captain Joseph Callo, USN (ret.); James Capua; Mike Du Pont; my former
Commentary
editor, Neal Kozodoy; my brother-in-law Captain Keith Krapels, USN; John W. Miller; Chet Nagle; Mark J Reed; Ivor Tiefenbrun; and Kevin Weir. Arlene Anns generously opened her private collection of materials relating to
American Machinist
magazine during the war years, and Philip Anns, ex-Hellcat pilot and Royal Navy (ret.), provided special inspiration and expert help. Friend and neighbor Len Wolowicz helped me to solve the problem of why Liberty ships developed cracks, and answered innumerable questions about the wartime steel industry.

So many scholars helped with individual chapters or problems both literary and archival, I can’t list them all, but certain ones deserve special
mention: Max Boot, Carlo D’Este, Victor Davis Hanson, Tim Kane, Richard Langworth, Andrew Roberts, Alex Rose, and Mark Wilson of the University of North Carolina–Charlotte.

My editor at Random House, Jonathan Jao, not only read and edited early drafts with an expert eye, but inadvertently contributed to the book’s birth in 2009 by asking me what I
really
wanted to write about after
Gandhi & Churchill
. My agents Glen Hartley and Lynn Chu relished the project from the start almost as much as I did. My parents, Arthur and Barbara Herman, read chapters, sent research materials, and reminisced about life in home front America in ways that helped to make the book more authentic.

My most important debt however, is to my wife, Beth. She understood the importance of this book almost from the moment I started working on it, and put up with the piles of books, diagrams, and back issues of
American Machinist, Business Week
, and
Fortune
that threatened to devour our house. She read early drafts of chapters, and I couldn’t have completed
Freedom’s Forge
without her. She has stuck with me through thick and thin.

That is why the book is lovingly dedicated to her.

APPENDIX B
JOINING THE ARSENAL OF DEMOCRACY

The following is an excerpt from
Your Business Goes to War
by Leo Cherne (Boston: Houghton Mifflin, 1942, pp. 50–53).

Typical Facility Conversions

Lists of typical conversions should be taken only as guides. Whether or not your plant can be converted to turn out a specific military product is an engineering problem which requires an engineering answer based on the size, facilities, and the other productive resources of your business. Each plant must be surveyed individually before it can be decided whether conversion to war output is possible. The following list of conversions which have already been carried out is suggestive.

Peacetime Products

Adding machines

Agricultural implements

Automatic lead pencils

Automobile accessories

Automobile bodies

Automobile cranks, brakes, rods, etc.

Automobile engines and motor cars

Automobile loading devices

Automobile steering gears

Automobiles

Automotive specialties

Batteries, sparkplugs, radio parts, roller skates

Boats and lighters

Bottle caps, bottlers, dairy and packers’ machine closures, cork insulation

Bottle coolers and dispensers

Box toes

Buses and trolleys

Business machines and appliances

Canners’ machinery

Canning and cooking apparatus

Cans and food containers

Cash registers and business machines

Casters, wheels, and furniture hardware

Clamps, magneto couplings, etc.

Coin-operated vending machines and ice-cream freezers

Commercial steel castings

Conveyors, excavators, stokers, chain belts

Cooling systems and equipment

Cork and glass products

Cotton mill machines (looms)

Cranks, ball

Die casting (non-ferrous)

Drop forgings

Electric cleaners, clothes washers, etc.

Electric elevators

Electric equipment

Electric fans, dryers, heaters, motors

Electric refrigerators

Electric storage batteries

Electric utility outdoor equipment

Electric welded pipe

Enameled steel stamping, specialties and signs

Fabricated basic-steel products

Fabricated piping and air-conditioning equipment

Fire sprinklers and alarms

Fireworks and toys

Flexible shafts, electric household appliances, electric shavers, etc.

Gas-stove burners, valves and lighters

Glass moulds

Hardware

Heating and cooling systems

Household appliances

Jewelry

Lawn mowers

Linoleum and floor coverings

Locomotive type boilers

Matches

Metal fabricators and enameling

Metal household specialties

Milling and drilling machines,

precision lathes, dial indicators and gauges

Mimeograph brand products

Mining machinery

Motor cars

Motor cooling equipment

Office furniture

Oil well and drillers’ supplies

Pipe fittings and valves

Pipe organs

Plumbing and sanitary fixtures

Portable machinery, agricultural implements, hydraulic presses, sawmill machines

Postal meters

Precision instruments

Printing presses

Pullman cars

Pumps and woodworking machinery

Pumps, meters, valves

Radio-phonographs

Radio vibrators, antennae

Rail and wire products

Railroad cars

Railroad locomotives

Railway signals

Razors

Rolled copper plate

Rolled steel products

Roller skates, wheels, keys, etc.

Sash doors and blinds

Screens-steel sash, dies, pulleys

Screw-machine products, milling machines and hair-clipping machines

Sheet-metal novelties

Shoe and harness machines

Shoes, men’s

Silk ribbons (also silk goods)

Springs and metal stampings

Steel-lead containers

Steel products

Steel vaults

Stoves, sheet-metal products, etc.

Textile machines

Textile trimmings, etc.

Tools, dies, jigs, fixtures, gauges, and special machines

Vacuum cleaners

Valves, cocks

Washing and ironing machines

Watches

Watch bracelets

Wheelbarrows and road scrapers

War Products

Automatic pistols

Artillery shell

Combat wagons and gun carriages

Ammunition components

Shell, 37m/m

Airplane parts

Fuze, P.D., M52

Airplane type combat tank engines

M.C. mounts

Machine guns

Artillery projectiles—shell

Cartridge cases 75m/m

Bullet cores

Fuze, B.C., M58

Pontoon bridges

Mounts, tripod, cal . .50

Mine anti-tank, metal parts

Scabbards

Machining, 75m/m H.E. shell

Artillery shell

Ammunition boxes

Fuze, P.D., M51 (metal parts)

Gas-mask canisters

Bomb fuzes

Fuze, P.D., M56

Fuze, anti-tank mine

Shell, R.F., H.E. 40m/m

Tripods for anti-aircraft guns

Mounts T2, 90m/m

Helmets

Shell, 3″ M42B2

Shot, S.A.P., 37m/m, M74

Casing, burster, M6

Booster, M22

Machining, artillery shell

Mounts, tripod, M.G., cal . .50

Recoil mechanisms for 3″ A.A. guns

Cartridge cases, 105m/m howitzer

Flares, A.C., parts, M26

Airplane parts

Fuze, P.D., M48 (metal parts)

Shell, 75m/m, M48 (M)

Demolition bombs and torpedo parts

Anti-tank mine

Armor-piercing projectiles

Bomb bodies

Artillery ammunition components

Signals, A.C.

Fuze, percussion, no. 253

Fuze, percussion, M31 (metal parts)

Burster, M7 for bomb

Cartridge cases, 37m/m

Sighting devices, cal . .30 rifles

Fuze, T.S.R., M54

Fuze, B.D., M58

Machining shrapnel

Machining, 75m/m artillery shell

Track shoe links on tanks

Aircraft cartridge signals

Shell, 105m/m Case cartridge, 105 howitzer

Anti-tank mines, H.E.

Gauges

Fuze, B.D., M58

Light combat tanks

Light combat tanks

Airplane landing wheels

Bomb containers

Machining 155m/m shell

Hand grenades

Saddle frames

Machining artillery shell

81m/m machine mounts

Bomb mechanisms

Navigation compasses

Gun—howitzer parts. Recoil mechanisms for 155 m/m howitzers

Forgings for 105m/m howitzer

Machining artillery shell

Fuze, percussion no. 253, 20m/m

Bomb fuzes and parts

Fuze, bomb, M103

Artillery shell

Artillery shell forgings

Machining 155m/m shell

Machining artillery shell

Primers, percussion, M23A1

Metal components for ammunition

3″ anti-aircraft gun forgings

Metal parts for boosters

Cartridge cases, 37m/m, M17

Fuze, P.D., M52

Projectiles, ball, 20m/m

Links, for 20m/m gun M1

Shot, A.P., 20m/m

Helmet linings

Silk, parachute, pyrotechnics

Gas-mask parts

Ammunition adapters and boosters

Forgings, 75m/m H.E. shell

Shell, 105m/m (M)

Metallic belt links

Mounts, tripod

Ammunition belts

Gauges, manufacturing 37m/m guns

Gas-mask parts

Shell, 20m/m H.E. (metal parts)

Anti-tank mine H.E., M1

Mechanical time fuzes

Booster, M22

Ammunition carts for machine guns

The major key to your ability to produce on munitions is your machine tool equipment. If you have machine tools which are scarce, your chances of getting into war production should be good. Following is a list of the machine tools most needed for work on war prime and subcontracts:

Horizontal boring machines
4″ bar and up
Vertical boring machines
54″ and up
Radial drills
15″ column and up
Jig borers
All sizes
Gear-grinding machines
All sizes
Thread-grinding machines
All sizes
Hobbing machines
All sizes
Engine lathes
36″ and up
Turret lathes
Chucking Type and 2½″ bar and up
Multiple spindle automatic screw machines
3″ bar and up
Milling machines (vertical or horizontal)
No. 2 and up
Thread-milling machines
All sizes
Planers
72″ and up
Die sinkers
All sizes
Reciprocating table surface grinders grinding periphery of solid wheel
For work 12″ wide by 12″ high and up
Cylindrical grinding machines (est.)
24″ work dia. and up
Planer type milling machines
For work 48″ wide by 48″ high and up
Vertical shapers (not slotters)
All sizes
Gear shapers, plane (Int.)
54″ and up

Other books

Cook's Night Out by Joanne Pence
Orb Sceptre Throne by Ian C. Esslemont
Blood Redemption by Tessa Dawn
Royal Hearts by Ruth Ann Nordin
Clockwork Angels: The Novel by Kevin J. & Peart Anderson, Kevin J. & Peart Anderson
Tarzan of the Apes by Edgar Rice Burroughs
Kill and Tell by Adam Creed
Wild Night by Nalini Singh
The Raising by Laura Kasischke
Wanda E. Brunstetter by Twice Loved